How to type typical hindi numbers and symbols with your existing hindi font.

How to type typical hindi numbers and symbols with your existing hindi font.

राष्ट्र ह्रदय ब्रह्म भक्ति चिह्न खट्ठा रत्ती अन्न |
These are the some words which are really difficult to type with most of Hindi fonts. Some of these words are regularly used in Hindi typing. If you go through Hindi paragraphs then probably you will face such kind of typing problems. Many words and symbols are needed to type separately by special codes.
 Yes these symbols attached with Hindi letters and can not be typed with a single key. We have to provide some special code every time to print them. These are the half letter in Hindi and can not be printed with shift key.
The same problem is for typical Hindi number.
A few Hindi fonts contain typical Hindi numbers like


 
When we try to type Hindi number or Sanskrit numbers then even a Hindi font can show you roman numbers. In this situation we need to type codes that works in all DevLys and Kruti Dev fonts properly. These all codes works with alt key.

Codes for Hindi Numbers-

To get your desired Hindi numbers we have to press alt key and give the respective numbers. The all combination will output a Hindi number. For example we want to type Hindi number 7, then we first press alt key and then number code i.e. 0137.

Codes for Hindi Symbols-

For complex Hindi words we need to type these codes for completing whole word correctly. For example we need to type Rashtra राष्ट्र first type राष्ट as normally and then provide code 0170 with alt key.
If still there is any problem mention in comment box I'll try to solve.

85 Comments

  1. Hemant Kumar18 May 2014 at 23:50

    the codes aren't working, I tried it for Rastra but its not working.
    please give other solution.

    ReplyDelete
    Replies
    1. Arvind1 June 2014 at 10:07

      Make sure you are not working with hindi unicode font and mangal font otherwise these codes will not work. (Mangal font is automatically activated when your system language is set to Hindi). They all work fine with two most used hindi font series Krutidev and DevLys, for example you can use Krutidev 020.

      Delete
  2. Unknown24 June 2014 at 18:40

    When I type sh shaljam ka then I have to press it 2 times first time when I press the button an apostrophe comma appears and on second time pressing the button I get sh what about it

    ReplyDelete
    Replies
    1. Arvind30 June 2014 at 00:02

      श can be typed by pressing " ' " key followed by "k", and for ष use "shift" + " ' " followed by 'k'. Here "k" is used to complete letter and not used while half letters needed. For Unicode and mangal font use "shift"+"m" for श, and "shift" + "," for ष.
      For other keys goto Keyboard Layout Page.

      Delete
    2. Naughtyspider17 February 2018 at 17:28

      how to type in kruti dev 010 फ़ latter?

      Delete
    3. Arvind27 June 2018 at 19:17

      Type Q+

      Delete
  3. Unknown24 June 2014 at 18:41

    And how to get sh shatkon ka

    ReplyDelete
  4. bhanu25 March 2015 at 16:43

    how do you use code

    ReplyDelete
    Replies
    1. Arvind26 March 2015 at 22:22

      Press alt key,
      hold it,
      type numbers,
      release alt key. that's all.

      Delete
  5. Unknown11 May 2015 at 13:18

    In ms word 2007 when I press the code with alt key, it always opens the save as dialogue box. How to resolve this problem. please help

    ReplyDelete
    Replies
    1. Arvind2 June 2015 at 12:21

      'Save as' dialog box opens when you press 'Alt + f + a' or simply pressing F12 key. There is no another way I found for appearing 'save as' dialogue box in M S word 2007. Please ensure you are working on krutidev fonts.
      It's working for me.
      If you still have problem please let me know.

      Delete
    2. Unknown4 August 2017 at 01:40

      same problem here too,, unable to resolve it

      Delete
    3. Arvind3 September 2017 at 23:47

      Which font you are using?

      Delete
    4. Unknown16 January 2018 at 14:36

      use numeric pad for entering alt codes.
      if your laptop doesn't have separate numeric pad then you may use on screen keyboard for this

      Delete
    5. rsns11 March 2018 at 18:58

      facing the same problem in krutidev 010 ... how can I resolve it?

      Delete
  6. ajay28 June 2015 at 08:38

    how do these work on mac keyboard, unable to get the alt+nnnn working

    ReplyDelete
    Replies
    1. Arvind29 June 2015 at 17:32

      I never used this on mac but in iPhone you can get half letters by providing "halant" after letter.
      For example in राष्ट्र type राष्ट then provide halant like राष्ट् then type र without spaces.

      Same for other words we have to recognize which letter is half in that word. Place halant correctly and you will get right word.
      Hope it works for you :)

      Delete
  7. Unknown21 July 2015 at 15:43

    How to type % symbol in Krutidev 010 font

    ReplyDelete
    Replies
    1. Arvind23 July 2015 at 11:08

      There is no glyph assigned for % symbol in Kruti Dev and DevLys fonts.

      Delete
  8. prabhat30 July 2015 at 09:51

    how to type % in devnagri inscript.?

    ReplyDelete
    Replies
    1. Arvind30 July 2015 at 21:44

      Refer this page for all keyboard layouts images of Devanagari script including Unicode, remington and Nepali.

      Delete
  9. CrazyMunda26 May 2016 at 16:27

    ‌‌‌DevLys और KrutiDev किसी-किसी font में मूर्धन्य (ष) टाइप करने पर मूर्धन्य (ष) नहीं टाइप होकर स्पेस ले लेता है ऐसा क्यों होता है?

    ReplyDelete
    Replies
    1. Arvind23 June 2016 at 11:52

      फ़ोन्ट का नाम बताएं ?

      Delete
    2. Unknown28 May 2018 at 19:59

      use ctrl+z after pressing shift+'

      Delete
    3. Arvind26 June 2018 at 21:48

      ctrl+z is used for undo, and it will immediately delete the letter you typed. It is only useful in case of auto-correct is on.

      Delete
    4. Unknown6 April 2019 at 19:01

      I have same problem bro. I am using devlys 10 font. I hope, you could help me.

      Delete
    5. Unknown6 April 2019 at 19:03

      Hello .

      Delete
  10. My_Mahanagar_Nashik26 November 2016 at 02:40

    Please tell me how to type तिसऱ्या in kruti dev10.

    ReplyDelete
  11. Unknown28 December 2016 at 14:14

    How I write Roman digit in kurti dev 10

    ReplyDelete
    Replies
    1. Arvind3 September 2017 at 23:52

      There are no glyphs assigned for Roman numbers in KrutiDev and Devlys series fonts :(

      Delete
  12. Unknown19 May 2017 at 13:20

    How to write karm or vradhhi in hindi .pls help

    ReplyDelete
    Replies
    1. Arvind3 September 2017 at 23:58

      Simply write deZ for Karm and o`f) for Vriddhi :-bd

      Delete
  13. Unknown19 May 2017 at 13:24

    How to write karm or vradhhi in hindi .pls help

    ReplyDelete
  14. Unknown19 May 2017 at 13:25

    How to write karm or vradhhi in hindi using mangal font .please help me

    ReplyDelete
    Replies
    1. Arvind4 September 2017 at 00:07

      कर्म = क + र् + म
      वृद्धि = व + ॠ + द् + ध + इ
      Hope this helped

      Delete
  15. Unknown30 May 2017 at 22:29

    How I use comma in kuruti Dev

    ReplyDelete
    Replies
    1. Arvind14 June 2017 at 14:02

      Use ']' for comma in all Kruti dev and Devlys fonts.

      Delete
  16. Unknown11 August 2017 at 10:55

    I am typing in Hindi kruti dev but it does not work when I use alt + any key combination. Some time before everything was OK and I also used alt key combinations but now it's not working.
    Although other characters are typed but only alt combinations cann't be typed. For example when I press alt + 0125 the cursur goes on the top of home page and selects all the characters. Why it is doing so. Is there is any problem in setting or something else plz reply.

    ReplyDelete
    Replies
    1. Arvind4 September 2017 at 00:11

      Its fine in MS word, are you using any other software? Let me know.

      Delete
  17. Unknown11 August 2017 at 10:58

    How to type sign + - * in Hindi kruti dev 010

    ReplyDelete
    Replies
    1. Arvind4 September 2017 at 00:17

      Just type
      shift + 4 for + sign
      shift + 7 for - sign
      alt + 0187 for ÷ sign
      shift + 2 for / sign
      alt + 0190 for = sign
      for all Krutidev and Devlys fonts

      Delete
  18. Unknown12 August 2017 at 01:43

    How to type bada oo in kruti dev10 or kruti dev045 without using unicode with alt key ? is there any other key with shift key to type bada oo ?

    ReplyDelete
    Replies
    1. Arvind4 September 2017 at 00:20

      You have to use alt + 0197 to type ऊ because there is no other way to type this in Krutidev and Devlys fonts.

      Delete
  19. Unknown12 August 2017 at 01:45

    meaning that how to type bada u as in used in word 'lucknow' with shift key ?

    ReplyDelete
  20. Unknown16 August 2017 at 09:29

    ? ? kese type kre im kruti dev 010

    ReplyDelete
    Replies
    1. Arvind4 September 2017 at 00:21

      Just type \ for ? in KrutiDev and Devlys fonts.

      Delete
  21. Unknown13 October 2017 at 21:21

    Akshar ke niche adhaa "ग aur "म" kese type kare. INKI alt codes nahi doye hue hai

    ReplyDelete
    Replies
    1. Arvind22 October 2017 at 21:10

      KrutiDev or Devlys fonts mein akshar ke neeche aadhe akshar nahi type kiye ja sakte ye keval Unicode (mangal) fonts mein hi possible hai.

      Delete
    2. Arvind22 October 2017 at 21:59

      Aadha T jaise Khatta, aadha D jaise Gaddha jaise kuchh limited alt codes hai like alt+205 par Ga aur Ma word ke neeche nahi type kiye ja sakte hain.

      Delete
  22. bhaktanishant17 November 2017 at 23:32

    मंगल (यूनिकोड) में ये स्पेशल कैरेक्टर कैसे टाईप करें।

    ReplyDelete
    Replies
    1. Arvind26 June 2018 at 22:47

      Open unicode keymap from here and find your desired letter.

      Delete
  23. Unknown28 November 2017 at 15:19

    in kurtidev 010, all the characters are coming but special characters are not coming using alt combination...why ??
    can anybody help me?

    ReplyDelete
    Replies
    1. Arvind26 June 2018 at 22:44

      Which operating system you are using on system?

      Delete
    2. neha28 July 2018 at 22:12

      Same problem i m facing ..alt codes r not working ..m using kruti dev

      Delete
  24. saurabh10 December 2017 at 22:40

    how to type double full stop marks in kruti pad for hindi writing

    ReplyDelete
  25. Naughtyspider17 February 2018 at 18:27

    how to type in kruti dev 010 फ़ letter?

    ReplyDelete
  26. Unknown8 March 2018 at 11:14

    kruti dev 010

    ReplyDelete
  27. Sumeet Kavyatra22 March 2018 at 10:39

    How to type ganga "angya" in krutidev ?

    ReplyDelete
    Replies
    1. Arvind26 June 2018 at 22:39

      Type xaxkk for ganga and vaKk or vaX;k for angya.

      Delete
  28. Unknown5 April 2018 at 10:59

    how to type in kruti dev 010 फ़ latter?

    ReplyDelete
  29. Unknown23 April 2018 at 17:47

    Trying to use codes of alt key in ms 365, font DevLys 010 but no result. Please help.

    ReplyDelete
  30. Town Wish24 May 2018 at 12:38

    how to insert ka, kha, ga, gha etc as numbering in hindi (word). Plz help.

    ReplyDelete
  31. Unknown27 June 2018 at 16:50

    kruti dev 010 me ष kaise likhe

    ReplyDelete
  32. Unknown1 July 2018 at 17:08

    how to do this ''×'' symbol in hindi font

    tell me on my gmail - vs819148@gmail.com

    ReplyDelete
    Replies
    1. Arvind1 July 2018 at 19:17

      There is no way to type 'x' symbol in remington fonts but you can type that in unicode fonts.

      Delete
  33. Unknown14 August 2018 at 22:13

    ई, ऊ, राष्ट्र की ट्र, ँ comouter पर कैसे टाईप करते हैं

    ReplyDelete
    Replies
    1. Arvind2 September 2018 at 23:55

      Sabse pehle koi bhi ek krutidev font computer par install karein, phir usey select karein, phir alt key dabaakar upar di list mein se koi bhi ek number jo aapko type karna hai usse relevent press karein phir alt key chhod dein.

      Delete
  34. Unknown14 August 2018 at 22:14

    ई, ऊ, राष्ट्र की ट्र, ँ comouter पर कैसे टाईप करते हैं

    ReplyDelete
  35. kismat sharma29 August 2018 at 18:51

    Sir kruti Dev 010 me comma ( , ) ka use kse Kare plz tell me as soon as possible...thanking sir

    ReplyDelete
  36. Unknown19 September 2018 at 13:12

    Sir software typing m koi code kaam nahi karta to Chand bindu ar ese word Kaise likhu

    ReplyDelete
    Replies
    1. Arvind23 September 2018 at 09:12

      Agar aap windows par DevLys ya krutidev par kaam kar rahe ho to upar diye saare code kaam karenge. Tarika phir se check karein.

      Delete
  37. Unknown23 September 2018 at 21:53

    code nahi kam karta hai kurtidew me

    ReplyDelete
  38. Unknown6 October 2018 at 12:38

    How to type underscore symbol in krutidev font??

    ReplyDelete
  39. shekhar12 November 2018 at 16:52

    how to type in krutidev double inverted commas

    ReplyDelete
  40. Unknown31 January 2019 at 17:56

    how to get multiple sign in kruti dev 010 font

    ReplyDelete
  41. Unknown4 February 2019 at 00:42

    how can type % in krutidev 110 font i tried alt+037 but it not works so plzz reply me onmy mail

    ReplyDelete
  42. Unknown28 August 2019 at 18:24

    Sir hindi me 9 (nine) kitne tarah se likhata hai, ye wala ९ kaise type kare.

    ReplyDelete

If you are asking question, be sure to check 'notify me' check box to get your answer notification. Promotion links are not allowed.